1- Direct Gloss System
PE Stoving Enamel (140-150°C) All Colors
It is a mixture of cross linking alkyd, polyester, acrylic, melamine resins which gives a good resistance to ultraviolet rays, a good weather-ability and elasticity. It also gives a film of very good feature, gloss and flow.
2- Base/ Clear System
MS Basecoat (All Colors)
A concentrated mixture of pre-ground high quality pigments in a fast-drying mat paint ready to be covered with a brilliant glossy protective clearcoat. It’s available in both metallic and solid colors.
3- Compact System Wet-On-Wet (3C 1B)
Wet-on-Wet PUR Primer 553811
It is a fast drying stoving 1K polyurethane primer that is used for 3c 1B (3 coats, one bake) compact system that gives advantage to spray the basecoat then the clearcoat directly in the same spraying booth without using an oven to cure.
MS Basecoat (All Colors)
A concentrated mixture of pre-ground high quality pigments in a fast-drying mat paint ready to be covered with a brilliant glossy protective clearcoat.
Available in both Metallic and Solid colors.
High Tech PUR Clearcoat – 232076
The stoving PUR clearcoat is a superior glossy protective finish applied over the basecoat to support UV, scratch and anti-chip resistance.
Touch Up Paint (Spot Repair System)
1. Touch up Paint.
2. 2K Clear Coat for Plastics & Touch Up – 228063
High quality paint used as spot repair to treat any minor defaults on the car body and also used for plastic parts finishes.
3. Adhesion Promoter to be used on plastic parts before applying Touch up paint.